TFL1
Barrier Foil Laminate
Many different products require barrier foil packaging, either to
protect them from moisture or to prevent the escape of fluids,
gasses or odours. Whatever the application, there is a suitable
laminate which can be offered in bag form. TFL1 is a
full international military specification aluminium foil laminate
which is food-contact grade certified.
Options
Printing is offered in either hot foil or flexo.
Zipper closures can be specified on any material. Other barrier
laminates are also available with alu foil or metallized
construction.
Sizes
Any size from 3" x 3" to 48" x 48" (75 x 75mm to 1m
x 2.2m)
Humidity
Indicator Cards >>
Construction |
|
15 micron |
PET (Polyester) + Bonding Layer |
|
12 micron |
Aluminium Foil + Bonding Layer |
|
75 micron |
Clear LLDPE Film |
|
Total Thickness = 105 microns. Commercial Trade
Tolerances plus/minus 5% Typical. |
Technical Data |
|
Mass g/m 2 |
120 Nominal |
|
Thickness, microns |
105 |
|
Tensile Strength (grab test) da
N/cm
- machine
direction
- cross
direction |
9,5
9 |
|
Punching in daN according to MIL B 131 |
6 |
|
Water vapour transmission rate 38ºC-95º RH
after crumpling Class 1 (Gelbo flexing) g/m2/24h |
0,10 |
|
Sealing Conditions
2 daN/cm2 |
200 Deg C - 2 Seconds |
Classification: MIL-B-131-H-TYPE 1-CLASS 1
The values shown above were developed from random samples taken from production material.
We believe them to be typical for this particular product. Because of normal lot to lot
variations,actual values may vary somewhat from these depicted here. Faulkner Export
Packaging Ltd makes no warranty, express or implied, as to the suitability of these
materials for any specific purpose. Consumers should determine suitability through
their own testing and evaluation. |
