STATPAK™ SD Anti-Static Polythene Bags
Type II Mil B 81705C
Antistatic Polythene is a homogenous non-amine
antistatic polythene film. Antistatic polythene bags will not
generate or carry a static charge and so are used to package non
sensitive products entering an ESD protected area. This polythene
is available clear. or with a pink tint This polythene is
effective at low relative humidities (less than 12%). The
antistatic additives used do not effect the film clarity or
quality.
Sizes
W x L
(All bag sizes are inside dimensions in inches)
| 3
x 5 |
5
x 8 |
6
x 12 |
10
x 14 |
14
x 16 |
| 3
x 8 |
5
x 9 |
6
x 18 |
10
x 15 |
14
x 18 |
| 4
x 6 |
5
x 26 |
7
x 16 |
10
x 26 |
15
x 18 |
| 4
x 16 |
6
x 8 |
8
x 10 |
12
x 14 |
16
x 18 |
| 4
x 24 |
6
x 9 |
8
x 12 |
12
x 16 |
18
x 20 |
| 5
x 7 |
6
x 10 |
10
x 12 |
12
x 18 |
18
x 24 |
Custom Sizes
Bags are also available to order in any size
from 3" X
3" to 60" X 88" and from 75 X 75mm to 1200 X 2000mm.
Print Options
Bags can be custom printed using hot foil stamps
or flexo printing. Bags are available with open tops or zip close
tops.
Physical Properties
| Colour |
Clear or Tinted |
| Thickness |
2 mils (50 micron) - 8 mils (200
microns) |
| Tensile Strength (ASTM D 882) |
1500 to 3000 psi |
| Tear Strength (ASTM D 1004) |
65 to 450 lbs/inch |
| Elongation (ASTM D 882) |
MD: 550 |
| Dart Impact (ASTM D 3420) |
250-750 grms |
| Burst (Mullen) (ASTM D 3420) |
20-60 psi |
Heating Sealing
- Temperature:
- Time:
- Pressure: |
(ASTM D 882)
250-375°F
.25 - 3.5 Seconds
30 -60 psi |
Electrical Properties
| Surface Resistivity (inside/outside)
at 28. 8°C and 12% RH |
<1012Ohms/sq |
| Static Decay Rate (5000
volts O volts at 28.8°C and 12% RH) |
< 2 Seconds |
The values shown above were developed from random samples taken from production material.
We believe them to be typical for this particular product. Because of normal lot to lot
variations,actual values may vary somewhat from these depicted here. Faulkner Export
Packaging Ltd makes no warranty, express or implied, as to the suitability of these
materials for any specific purpose. Consumers should determine suitability through
their own testing and evaluation.
|
