|
STATPAK™ SB
Static Shielding Bubble Laminate
This bag combines static shielding with physical
protection. Transparent static shielding bag film is laminated to
an antistatic polyethylene bubble wrap. Standard STATPAK BM static
shielding film forms a Faraday cage around your product while the
inner layer of antistatic bubble wrap provides excellent physical
protection. Both of these materials are qualified to Military
Standard B 81705 C.
-
Cushioned Static Shielding Pouch
-
ESD transparent static shielding bag film
laminated to an antistatic polyethylene bubblewrap.
-
Combines physical and antistatic protection.
-
This product is fully reusable, protecting both
your product and the environment.
Sizes
Bags are available to order in any size from 4½ " x 6" to 30" x 30"
and from 113mm x 150mm to 750 x 750mm.
Technical Specification
AIRPAK® Bubblewrap Film:
Physical Properties
-
Backing Layer: 35 micron co-extruded
natural film 1650mm wide.
-
Top Layer: 25 micron co-extruded
natural film 1650mm wide.
-
All polymers used comply with B53412: 1976:
Type A class H, Defence standard 93.36/Issue 1 Type QX-D.
-
LDPE is chemically unreactive and is
regarded as being biologically inert. There is no release of
noxious fumes from LDPE at ambient temperature
Electrical Properties
-
Surface Resistivity (both surfaces) <
10¹²Ohm/sq
-
Static Charge Decay Rate(5Kv to 0 volts):
< 2 seconds
-
Also available in large bubble with a top
layer of 60 micron.
Static Shielding STATPAK BM
Electrical Properties
|
|
EMI Shielding (Mil-B-81705C) |
>10 dB between 1 & 10 GHZ |
|
Resistivity - Conductive Metal Layer (ASTM
D-257) |
<50 ohms/sq. (5 x 10¹ ohm/sq) |
|
Capacitive Probe Test (High Voltage
Discharge)-(EIA -Std 541/Appendix E - 1KV); |
<20 volts |
|
Static Decay (FTMS 101C, Method 4046.1,
5000 to O Volts): |
<.0.03 seconds |
|
Surface Resistivity (both surfaces)-
(ESO11.11 @ 12% R.H.): |
<1012Ohms/sq
(1010Ohm/sq typical) |
|
Charge Generation -nominal (Modified
incline plane average nC/sq.in.) |
Teflon: - 0.09 Quartz: +0.10 |
The values shown above were developed from random samples taken from production material.
We believe them to be typical for this particular product. Because of normal lot to lot
variations,actual values may vary somewhat from these depicted here. Faulkner Export
Packaging Ltd makes no warranty, express or implied, as to the suitability of these
materials for any specific purpose. Consumers should determine suitability through
their own testing and evaluation.
|
|
